| Service Point Installation | E/2A | 1/2 | 44 |
| Service Point Installation | E/2A | 2/2 | 45 |
| Service Equipment Type III-AF | E/2D | 1/2 | 46 |
| Service Equipment Type III-AF | E/2D | 2/2 | 47 |
| Traffic Signal Head Mountings | E/3A | 1/1 | 48 |
| Controller Cabinet Foundation Type P Modified | E/4 | 1/1 | 49 |
| Inductive Loop Detectors | E/5A | 1/3 | 50 |
| Inductive Loop Detectors | E/5A | 2/3 | 51 |
| Inductive Loop Detectors | E/5A | 3/3 | 52 |
| Pedestrian Pushbutton Assembly | E/5C | 1/1 | 53 |
| Signal Mounting Clearance Requirements | E/6A | 1/1 | 54 |
| (Not Used) | | | 55 |
| Lighting Standard Type Post Top | E/6B | 1/2 | 56 |
| Lighting Standard Type Post Top | E/6B | 2/2 | 57 |
| Pullbox and Conduit Termination | E/8 | 1/2 | 58 |
| Pullbox and Conduit Termination | E/8 | 2/2 | 58-1 |
| Conductor Splicing | E/13 | 1/2 | 59 |
| Conductor Splicing | E/13 | 2/2 | 60 |
| Signal Standard Type SCC 29-6-160 (29-6-100) and Type SCC 26-6-160 (26-6-100) | E/40 | 1/1 | 61 |
| Connection Details Type SCC 26-6-160 (26-6-100) and Type SCC 29-6-160 (29-6-100) | E/41 | 1/1 | 62 |
| Signal Head Mounting Assembly Type SCC 26-6-160 (26-6-100) and SCC 29-6-160 (29-6-100) | E/42 | 1/1 | 63 |
| Signal Standard Foundation Type SCC 26-6-160 (26-6-100) and SCC 29-6-160 | E/43 | 1/1 | 64 |
| Wire Identification Label | E/44 | 1/1 | 65 |
| Electrical Conduit Trenching Requirements | E/45 | 1/1 | 66 |
| Electrolier & Pull Box Location | E/46 | 1/1 | 67 |
| Pole and Conduit Bonding | E/47 | 1/1 | 68 |
| Cabinet Bonding/Grounding | E/48 | 1/1 | 69 |
| Pole Identification | E/49 | 1/1 | 70 |
| Battery Backup System Foundation and Conduit | E/50 | 1/1 | 70-1 |
| Battery Backup, Service and Signal Equipment Conduit Layout | E/51 | 1/1 | 70-2 |
| Inductive Bicycle Loop Detector | E/52 | 1/1 | 70-3 |
| Hardware Mounting for Bicycle Sensor | E/53 | 1/1 | 70-4 |
| Hardware Mounting for CCTV Camera and Pedestrian Sensor | E/54 | 1/1 | 70-5 |
